Call quality best practice

Customer satisfaction for your Video Calling integrated app depends on the quality of video and audio it provides. Quality of audiovisual communication through your app is affected by the following factors:

• Bandwidth of network connection: Bandwidth is the volume of information that an Internet connection can handle per unit of time. When the available bandwidth is not sufficient to transmit the amount of data necessary to provide the desired video quality, your users see jerky or frozen video along with audio that cuts in and out.

• Stability of network connection: Network connections are often unstable with the network quality going up and down. Users get temporarily disconnected and come back online after an interruption. These issues lead to a poor audiovisual experience for your users unless your app is configured to respond to these situations and take remedial actions.

• Hardware quality: The camera and microphone used to capture video and audio must be of sufficiently good quality. If the user's hardware does not capture the audiovisual information in suitably high definition, it limits the quality of audio and video that is available to the remote user.

• Video and audio settings: The sharpness, smoothness, and overall quality of the video is directly linked to the frame rate, bitrate and other video settings. Similarly, the audio quality depends on the sample rate, bitrate, number of channels and other audio parameters. If you do not choose proper settings, the audio and video transmitted are of poor quality. On the other hand, if the settings are too demanding, the available bandwidth quickly gets choked, leading to suboptimal experience for your users.

• Echo: Echo is produced when your audio signal is played by a remote user through a speakerphone or an external device. This audio is captured by the remote user's microphone and sent back to you. Echo negatively affects audio quality, making speech difficult to understand.

• Multiple users in a channel: When multiple users engage in real-time audio and video communication in a channel, the available bandwidth is quickly used up due to several incoming audio and video streams. The device performance also deteriorates due to the excessive workload required to decode and render multiple video streams.

This page shows you how to use Video SDK features to account for these factors and ensure optimal audio and video quality in your app.

Video SDK provides the following features to deal with channel quality issues:

• Network probe test: The network probe test checks the last-mile network quality before you join a channel. The method returns network quality statistics including round-trip latency, packet loss rate, and network bandwidth.

• Echo test: The echo test captures audio through the microphone on the user’s device, and sends it to Agora SD-RTN™. After a delay of about 2 seconds, Agora SD-RTN™ sends the audio back to the sending device to be played. The returned audio enable a user to judge if their hardware and network connection are of adequate quality. Agora recommends that an echo test be performed before a network probe test.

• Audio profiles: Delivering the best quality audio to your users requires choosing audio settings customized for your particular application. In Video SDK you can choose from pre-configured audio profiles and audio scenarios to optimize audio settings for a wide range of applications.

  • An audio profile sets the audio sample rate, bitrate, encoding scheme, and the number of channels for your audio. Video SDK offers several preset audio profiles to choose from. To pick the most suitable audio profile for your application, refer to the List of audio profiles.
  • An audio scenario specifies the audio performance in terms of volume, audio quality, and echo cancellation. Based on the nature of your application, you can pick the most suitable option from the List of audio scenarios.

• Video profiles: In real-time engagement scenarios, user experience is closely tied to the sharpness, smoothness, and overall quality of the video. In Video SDK you can set the video dimensions, framerate, bitrate, orientation mode, and mirror mode by specifying a video profile. You can also set the degradation preference to specify how video quality is degraded under suboptimal network conditions. To find the suitable bitrate for a given combination of dimensions and framerate, refer to the Video profile table.

• In-call quality statistics: Video SDK provides several callbacks and methods to monitor channel quality in real-time. These methods and callbacks provide vital statistics to evaluate communication quality and provide the information necessary to take remedial actions. Video SDK provides you the following statistics :

  • Network quality: The uplink and downlink network quality in terms of the transmission bitrate, packet loss rate, average Round-Trip Time, and jitter in your network.

  • Call quality: Information on the current user session and the resources being used by the channel in terms of the number of users in a channel, packet loss rate, CPU usage and call duration. Use these statistics to troubleshoot call quality issues.

  • Local audio quality: Local audio measurements such as audio channels, sample rate, sending bitrate, and packet loss rate in the audio stream.

  • Remote audio quality: These statistics provide information such as the number of channels, received bitrate, jitter in the audio stream, audio loss rate, and packet loss rate.

  • Local video quality: Local video quality statistics such as packet loss rate, frame rate, encoded frame width, and sent bitrate.

  • Remote video quality: These statistics include information about the width and height of video frames, packet loss rate, receiving stream type, and bitrate in the reported interval.

  • Video and Audio states: Agora SD-RTN™ reports the new state, and the reason for state change, whenever the state of an audio or video stream changes.

• Dual stream mode: In dual-stream mode, Video SDK transmits a high-quality and a low-quality video stream from the sender. The high-quality stream has higher resolution and bitrate than the the low-quality video stream. Remote users subscribe to the low-quality stream to improve communication continuity as it reduces bandwidth consumption. Subscribers should also choose the low-quality video streams when network condition are unreliable, or when multiple users publish streams in a channel.

• Video stream fallback: When network conditions deteriorate, Video SDK automatically switches the video stream from high-quality to low-quality, or disables video to ensure audio delivery. Agora SD-RTN™ continues to monitor the network quality after fallback, and restores the video stream when network conditions allow it. To improve communication quality under extremely poor network conditions, implement a fallback option in your app.

• Video for multiple users: When multiple users join a channel, several incoming high-quality video streams negatively impact network and device performance. In such cases, you can manage the excess load by playing high-quality video from the user who has focus, and low quality streams from all other users. To implement this feature, it is necessary for all users in the channel to enable the dual stream mode.

• Echo cancellation when playing audio files: Video SDK offers audio mixing functionality to play media in a channel. You can mix a local or online audio file with the audio captured through the microphone, or completely replace the microphone audio. Audio mixing takes advantage of the echo cancellation features of Video SDK to reduce echo in a channel. Refer to Audio and voice effects to learn more about audio mixing in Video SDK.

• Connection state monitoring: The connection state between an app and Agora SD-RTN™ changes when the app joins or leaves a channel, or goes offline due to network or authentication issues. Video SDK provides connection state monitoring to detect when and why a network connection is interrupted. When the connection state changes, Agora SD-RTN™ sends a callback to notify the app. Video SDK then automatically tries to reconnect to the server to restore the connection.

• Log files: Video SDK provides configuration options that you use to customize the location, content and size of log files containing key data of Video SDK operation. When you set up logging, Video SDK writes information messages, warnings, and errors regarding activities such as initialization, configuration, connection and disconnection to log files. Log files are useful in detecting and resolving channel quality issues.

The following figure shows the workflow you need to implement to ensure channel quality in your app:

In order to follow this procedure you must have:

• Implemented the SDK quickstart project for Broadcast Streaming.

• Android Studio 4.1 or higher.
• Android SDK API Level 24 or higher.
• A mobile device that runs Android 4.1 or higher.

• An Agora account and project.

• A computer with Internet access.

  Ensure that no firewall is blocking your network communication.

To create the environment necessary to implement call quality best practices into your app, open the SDK quickstart Broadcast Streaming project you created previously.

This section shows you how to integrate call quality optimization features of Video SDK into your app, step by step.

This section guides you through the necessary UI changes in the SDK quickstart project interface to implement call quality features.

Add a network status indicator to the user interface

To enable app users to see the network status, add TextViews to the user interface. To do this, open /app/res/layout/activity_main.xml and add the following lines before </RelativeLayout>:

_25

<TextView

_25

android:id="@+id/networkStatus"

_25

android:layout_width="20dp"

_25

android:layout_height="20dp"

_25

android:layout_below="@id/LeaveButton"

_25

android:layout_alignRight="@id/LeaveButton"

_25

/>

_25

_25

<TextView

_25

android:id="@+id/networkLabel"

_25

android:layout_width="wrap_content"

_25

android:layout_height="wrap_content"

_25

android:layout_below="@id/LeaveButton"

_25

android:layout_toLeftOf="@id/networkStatus"

_25

android:text="Network Status: "

_25

/>

_25

_25

<Button

_25

android:id="@+id/echoTestButton"

_25

android:layout_width="wrap_content"

_25

android:layout_height="wrap_content"

_25

android:layout_below="@+id/LeaveButton"

_25

android:layout_alignStart="@id/JoinButton"

_25

android:onClick="echoTest"

_25

android:text="Start Echo Test" />

1. Import the required Android and Agora libraries

   To access and use the TextView object and integrate Video SDK channel quality libraries, add the following statements after the last import statement in /app/java/com.example.<projectname>/MainActivity.

   
   

   _7

   import android.widget.TextView;

   _7

   import android.widget.Button;

   _7

   import android.graphics.Color;

   _7

   _7

   import io.agora.rtc2.EchoTestConfiguration;

   _7

   import io.agora.rtc2.internal.LastmileProbeConfig;

   _7

   import io.agora.rtc2.video.VideoEncoderConfiguration;

   
   

2. Define variables to manage test state and workflow

   In /app/java/com.example.<projectname>/MainActivity, add the following declaration to class MainActivity:

   
   

   _7

   private TextView networkStatus; // For updating the network status

   _7

   private int counter1 = 0; // Controls the frequency of messages

   _7

   private int counter2 = 0; // Controls the frequency of messages

   _7

   private int remoteUid; // Uid of the remote user

   _7

   private boolean highQuality = true; // Quality of the remote video stream being played

   _7

   private boolean isEchoTestRunning = false; // Keeps track of the echo test

   _7

   private Button echoTestButton;

   
   

3. Update the network status indication

   To show the network quality result visually to the user, add the following to the MainActivity class:

   
   

   _6

   private void updateNetworkStatus(int quality){

   _6

   if (quality > 0 && quality < 3) networkStatus.setBackgroundColor(Color.GREEN);

   _6

   else if (quality <= 4) networkStatus.setBackgroundColor(Color.YELLOW);

   _6

   else if (quality <= 6) networkStatus.setBackgroundColor(Color.RED);

   _6

   else networkStatus.setBackgroundColor(Color.WHITE);

   _6

   }

   
   

   To set up access to the elements, add the following lines to the onCreate method after setupVideoSDKEngine();

   
   

   _2

   networkStatus = findViewById(R.id.networkStatus);

   _2

   echoTestButton = findViewById(R.id.echoTestButton);

   
   

To implement the call quality features, take the following steps:

1. Enable the user to test the network

   In the MainActivity class, add the following method:

   
   

   _14

   public void startProbeTest() {

   _14

   // Configure a LastmileProbeConfig instance.

   _14

   LastmileProbeConfig config = new LastmileProbeConfig();

   _14

   // Probe the uplink network quality.

   _14

   config.probeUplink = true;

   _14

   // Probe the downlink network quality.

   _14

   config.probeDownlink = true;

   _14

   // The expected uplink bitrate (bps). The value range is [100000,5000000].

   _14

   config.expectedUplinkBitrate = 100000;

   _14

   // The expected downlink bitrate (bps). The value range is [100000,5000000].

   _14

   config.expectedDownlinkBitrate = 100000;

   _14

   agoraEngine.startLastmileProbeTest(config);

   _14

   showMessage("Running the last mile probe test ...");

   _14

   }

   
   

2. Implement best practice for app initiation

   When a user starts your app, the Agora Engine is initialized in setupVideoSDKEngine. After initialization, do the following:

   • Enable dual stream mode: Required for multi-user scenarios.
   • Set an audio profile and audio scenario: Setting an audio profile is optional and only required if you have special requirements such as streaming music.
   • Set the video profile: Setting a video profile is also optional. It is useful when you want to change one or more of mirrorMode, frameRate, bitrate, dimensions, orientationMode, degradationPrefer or compressionPrefer from the default setting to custom values. For more information, see video profile table.
   • Start the network probe test: A quick test at startup to gauge network quality.

   To implement these features, add the following code to setupVideoSDKEngine after agoraEngine.enableVideo();

   
   

   _26

   // Enable the dual stream mode

   _26

   agoraEngine.enableDualStreamMode(true);

   _26

   // Set audio profile and audio scenario.

   _26

   agoraEngine.setAudioProfile(Constants.AUDIO_PROFILE_DEFAULT, Constants.AUDIO_SCENARIO_GAME_STREAMING);

   _26

   _26

   // Set the video profile

   _26

   VideoEncoderConfiguration videoConfig = new VideoEncoderConfiguration();

   _26

   // Set mirror mode

   _26

   videoConfig.mirrorMode = VideoEncoderConfiguration.MIRROR_MODE_TYPE.MIRROR_MODE_AUTO;

   _26

   // Set framerate

   _26

   videoConfig.frameRate = VideoEncoderConfiguration.FRAME_RATE.FRAME_RATE_FPS_10.getValue();

   _26

   // Set bitrate

   _26

   videoConfig.bitrate = VideoEncoderConfiguration.STANDARD_BITRATE;

   _26

   // Set dimensions

   _26

   videoConfig.dimensions = VideoEncoderConfiguration.VD_640x360;

   _26

   // Set orientation mode

   _26

   videoConfig.orientationMode = VideoEncoderConfiguration.ORIENTATION_MODE.ORIENTATION_MODE_ADAPTIVE;

   _26

   // Set degradation preference

   _26

   videoConfig.degradationPrefer = VideoEncoderConfiguration.DEGRADATION_PREFERENCE.MAINTAIN_BALANCED;

   _26

   // Set compression preference: low latency or quality

   _26

   videoConfig.compressionPrefer = VideoEncoderConfiguration.COMPRESSION_PREFERENCE.PREFER_LOW_LATENCY;

   _26

   // Apply the configuration

   _26

   agoraEngine.setVideoEncoderConfiguration(videoConfig);

   _26

   _26

   // Start the probe test

   _26

   startProbeTest();

   
   

3. Test the user's hardware

   The echo test checks that the user's hardware is working properly. To start and stop the test, add the following method to the MainActivity class:

   
   

   _22

   public void echoTest(View view) {

   _22

   if (!isEchoTestRunning) {

   _22

   EchoTestConfiguration echoConfig = new EchoTestConfiguration();

   _22

   echoConfig.enableAudio = true;

   _22

   echoConfig.enableVideo = true;

   _22

   echoConfig.token = token;

   _22

   echoConfig.channelId = channelName;

   _22

   _22

   setupLocalVideo();

   _22

   echoConfig.view = localSurfaceView;

   _22

   localSurfaceView.setVisibility(View.VISIBLE);

   _22

   agoraEngine.startEchoTest(echoConfig);

   _22

   echoTestButton.setText("Stop Echo Test");

   _22

   isEchoTestRunning = true;

   _22

   } else {

   _22

   agoraEngine.stopEchoTest();

   _22

   echoTestButton.setText("Start Echo Test");

   _22

   isEchoTestRunning = false;

   _22

   setupLocalVideo();

   _22

   localSurfaceView.setVisibility(View.GONE);

   _22

   }

   _22

   }

   
   

4. Listen to Agora Engine events to receive state change notifications and quality statistics

   Add the following event handlers to receive state change notifications and quality statistics:

   • onLastmileQuality: Receives the network quality result.
   • onLastmileProbeResult: Receives detailed probe test results.
   • onNetworkQuality: Receives statistics on network quality.
   • onRtcStats: Receives the Agora Engine stats.
   • onRemoteVideoStateChanged: Receives notification regarding any change in the state of the remote video.
   • onRemoteVideoStats: Receives stats about the remote videos.

   In the MainActivity class, add the following methods after private final IRtcEngineEventHandler mRtcEventHandler = new IRtcEngineEventHandler() {:

   
   

   _64

   @Override

   _64

   public void onConnectionStateChanged(int state, int reason) {

   _64

   showMessage("Connection state changed"

   _64

   + "\n New state: " + state

   _64

   + "\n Reason: " + reason);

   _64

   }

   _64

   _64

   @Override

   _64

   public void onLastmileQuality(int quality) {

   _64

   runOnUiThread(() -> updateNetworkStatus(quality));

   _64

   }

   _64

   _64

   @Override

   _64

   public void onLastmileProbeResult(LastmileProbeResult result) {

   _64

   agoraEngine.stopLastmileProbeTest();

   _64

   // The result object contains the detailed test results that help you

   _64

   // manage call quality, for example, the downlink jitter.

   _64

   showMessage("Downlink jitter: " + result.downlinkReport.jitter);

   _64

   }

   _64

   _64

   @Override

   _64

   public void onNetworkQuality(int uid, int txQuality, int rxQuality) {

   _64

   // Use downlink network quality to update the network status

   _64

   runOnUiThread(() -> updateNetworkStatus(rxQuality));

   _64

   }

   _64

   _64

   @Override

   _64

   public void onRtcStats(RtcStats rtcStats) {

   _64

   counter1 += 1;

   _64

   String msg = "";

   _64

   _64

   if (counter1 == 5)

   _64

   msg = rtcStats.users + " user(s)";

   _64

   else if (counter1 == 10 ) {

   _64

   msg = "Packet loss rate: " + rtcStats.rxPacketLossRate;

   _64

   counter1 = 0;

   _64

   }

   _64

   _64

   if (msg.length()>0) showMessage(msg);

   _64

   }

   _64

   _64

   @Override

   _64

   public void onRemoteVideoStateChanged(int uid, int state, int reason, int elapsed) {

   _64

   String msg = "Remote video state changed: \n Uid =" + uid

   _64

   + " \n NewState =" + state

   _64

   + " \n reason =" + reason

   _64

   + " \n elapsed =" + elapsed;

   _64

   _64

   showMessage(msg);

   _64

   }

   _64

   _64

   @Override

   _64

   public void onRemoteVideoStats(RemoteVideoStats stats) {

   _64

   counter2 += 1;

   _64

   _64

   if (counter2 == 5) {

   _64

   String msg = "Remote Video Stats: "

   _64

   + "\n User id =" + stats.uid

   _64

   + "\n Received bitrate =" + stats.receivedBitrate

   _64

   + "\n Total frozen time =" + stats.totalFrozenTime;

   _64

   counter2 = 0;

   _64

   showMessage(msg);

   _64

   }

   _64

   }

   
   

   Each event reports the statistics of the audio video streams from each remote user and host.

5. Switch stream quality when the user taps the remote video

   To take advantage of dual-stream mode and switch remote video quality to high or low, add the following to the MainActivity class:

   
   

   _11

   public void setStreamQuality(View view) {

   _11

   highQuality = !highQuality;

   _11

   _11

   if (highQuality) {

   _11

   agoraEngine.setRemoteVideoStreamType(remoteUid, Constants.VIDEO_STREAM_HIGH);

   _11

   showMessage("Switching to high-quality video");

   _11

   } else {

   _11

   agoraEngine.setRemoteVideoStreamType(remoteUid, Constants.VIDEO_STREAM_LOW);

   _11

   showMessage("Switching to low-quality video");

   _11

   }

   _11

   }

   
   

   To fire this method when the user taps the remote view panel, add the following line after <FrameLayout android:id="@+id/remote_video_view_container" in activity_main.xml:

   
   

   _1

   android:onClick="setStreamQuality"

   
   

   To obtain the uid of the remote user, add the following line to the onUserJoined method:

   
   

   _1

   remoteUid = uid;

   
   

6. Configure the Video SDK log file

   To customize the location, content and size of log files, add the following code to setupVideoSDKEngine before agoraEngine = RtcEngine.create(config);:

   
   

   _6

   // Configure the log file

   _6

   RtcEngineConfig.LogConfig logConfig = new RtcEngineConfig.LogConfig();

   _6

   logConfig.filePath = "/storage/emulated/0/Android/data/<package name>/files/agorasdk1.log.";

   _6

   logConfig.fileSizeInKB = 256; // Range 128-1024 Kb

   _6

   logConfig.level = Constants.LogLevel.getValue(Constants.LogLevel.LOG_LEVEL_WARN);

   _6

   config.mLogConfig = logConfig;

   
   

   Make sure you replace the <package name> in filePath with the name of your package.

   If you want to upload the log file automatically to a CDN, call setLocalAccessPoint(LocalAccessPointConfiguration config) to specify the local access point and assign the native access module to the SDK.

To ensure that you have implemented call quality features into your app:

1. Generate a temporary token in Agora Console .

2. In your browser, navigate to the Agora dual stream web demo and update App ID, Channel, and Token with the values for your temporary token, then click Join.

3. In Android Studio, open app/java/com.example.<projectname>/MainActivity, and update appId, channelName and token with the values for your temporary token.

4. Connect a physical Android device to your development device.

5. In Android Studio, click Run app. A moment later you see the project installed on your device.

   If this is the first time you run the project, grant microphone and camera access to your app.

6. When the app starts, it does the following:

   • Sets the log file location, size, and logging level according to your preference.
   • Enables the dual-stream mode.
   • Sets the audio profile.
   • Sets the video profile.
   • Starts a network probe test.

   You see the result of the network probe test displayed in the network status icon.

7. Run the echo test.

   1. Press Start Echo Test. You see the local camera feed on the test device screen.

   2. Speak into the device microphone. You hear the recorded audio after a short delay.

      This test confirms that the user's hardware is working properly.

   3. Press Stop Echo Test to end the test before joining a channel.

8. Press Join to connect to the same channel as your web demo.

9. After joining a channel, you receive toast messages informing you of some selected call statistics, including:

   • The number of users in the channel
   • Packet loss rate
   • Remote video stats
   • Remote video state changes

10. You see the network status indicator updated periodically based on the result of the onNetworkQuality callback.

11. Tap the remote video panel. You see the remote video switches from high-quality to low-quality. Tap the remote video again to switch back to hight-quality video.

This section contains information that completes the information in this page, or points you to documentation that explains other aspects to this product.

The recommended video settings vary by scenario. For example, in a one-to-one online class, the video windows of the teacher and student are both large, which calls for higher resolutions, frame rate, and bitrate. However, in a one-to-many online class, the video windows are smaller. You can set lower resolution, frame rate, and bitrate to accommodate bandwidth limitations. The recommended settings for these different scenarios are:

• One-to-one video call:

  • Resolution: 320 x 240; Frame rate: 15 fps; Bitrate: 200 Kbps.
  • Resolution: 640 x 360; Frame rate: 15 fps; Bitrate: 400 Kbps.

• One-to-many video call:

  • Resolution: 160 x 120; Frame rate: 15 fps; Bitrate: 65 Kbps.
  • Resolution: 320 x 180; Frame rate: 15 fps; Bitrate: 140 Kbps.
  • Resolution: 320 x 240; Frame rate: 15 fps; Bitrate: 200 Kbps.

Video SDK provides a selection of video dimensions, framerate, and bitrate to choose from. You can also customize the values according to the table below.

Video Profile	Resolution (Width×Height)	Frame rate (fps）	Bitrate（Kbps）
120p	160 × 120	15	65
120p_1	160 × 120	15	65
120p_3	120 × 120	15	50
180p	320 × 180	15	140
180p_1	320 × 180	15	140
180p_3	180 × 180	15	100
180p_4	240 × 180	15	120
240p	320 × 240	15	200
240p_1	320 × 240	15	200
240p_3	240 × 240	15	140
240p_4	424 × 240	15	220
360p	640 × 360	15	400
360p_1	640 × 360	15	400
360p_3	360 × 360	15	260
360p_4	640 × 360	30	600
360p_6	360 × 360	30	400
360p_7	480 × 360	15	320
360p_8	480 × 360	30	490
360p_9	640 × 360	15	800
360p_10	640 × 360	24	800
360p_11	640 × 360	24	1000
480p	640 × 480	15	500
480p_1	640 × 480	15	500
480p_2	640 × 480	30	1000
480p_3	480 × 480	15	400
480p_4	640 × 480	30	750
480p_6	480 × 480	30	600
480p_8	848 × 480	15	610
480p_9	848 × 480	30	930
480p_10	640 × 480	10	400
540p (Default)	960 × 540	15	1100
720p	1280 × 720	15	1130
720p_1	1280 × 720	15	1130
720p_2	1280 × 720	30	2000
720p_3	1280 × 720	30	1710
720p_5	960 × 720	15	910
720p_6	960 × 720	30	1380
1080p	1920 × 1080	15	2080
1080p_1	1920 × 1080	15	2080
1080p_2	1920 × 1080	30	3000
1080p_3	1920 × 1080	30	3150
1080p_5	1920 × 1080	60	4780

For more details, see VideoEncoderConfiguration.

You can also refer to the following tables to learn the default resolution, frame rate, and bitrate of the low-quality video stream for different mainstream video profiles of the high-quality video stream.

High-quality stream video profile: Communication	Default low-quality stream video profile: Communication
320 × 240, 15, 200	144 × 108, 5, 20
640 × 360, 15, 400	288 × 162, 5, 40
640 × 480, 15, 500	288 × 216, 5, 50
1280 × 720, 15, 1130	288 × 162, 5, 113
240 × 320, 15, 200	108 × 144, 5, 20
240 × 320, 15, 200	108 × 144, 5, 20
360 × 640, 15, 400	164 × 288, 5, 40
480 × 640, 15, 500	216 × 288, 5, 50
720 × 1280, 15, 1130	164 × 288, 5, 113

High-quality stream video profile: Live-broadcast	Default low-quality stream video profile: Live-broadcast
320 × 240, 15, 350	160 × 120, 5, 45
640 × 360, 15, 650	192 × 108, 5, 50
640 × 480, 15, 800	160 × 120, 5, 45
1280 × 720, 15, 1600	192 × 108, 5, 50
240 × 320, 15, 350	120 × 160, 5, 45
360 × 640, 15, 650	108 × 192, 5, 50
480 × 640, 15, 800	120 × 160, 5, 45
720 × 1280, 15, 1600	108 × 192, 5, 50

This section provides the recommended video resolution, frame rate, and bitrate for high-quality and low-quality streams.

Channel profile	Video stream type	Device system	Recommended video profile
Communication	high-quality stream	macOS, Windows	640 × 480, 15, 500
		Android, iOS	640 × 360, 15, 400
	low-quality stream	macOS, Windows	320 × 180, 7, 75
		Android, iOS	160 × 90, 7, 45
Live-broadcast	high-quality stream	macOS, Windows	640 × 480, 15, 800
		Android, iOS	640 × 360, 15, 650
	low-quality stream	macOS, Windows	320 × 180, 7, 126
		Android, iOS	160 × 90, 7, 64

In practice, different user devices, user network conditions, application service locations, and user requirements affect which kinds of video profiles you use. Therefore, if the recommended video profiles are not suitable for you, contact technical support for assistance.

By default, Video SDK does not mirror the video during encoding. You can use the mirrorMode parameter to decide whether to mirror the video that remote users see.

When the connection state changes, Agora sends the onConnectionStateChanged callback. The following diagram illustrates the various states and how the states change as a client app joins and leaves a channel:

When the network connection is interrupted, the SDK automatically tries to reconnect to the server. The following diagram shows the callbacks received by the local user (UID1) and the remote user (UID2) when the local user joins the channel, gets a network exception, lises connection, and rejoins the channal.

As shown in the above diagram:

• T0: The SDK receives the joinChannel request from UID1.
• T1: 200 ms after calling joinChannel, UID1 joins the channel. In the process, UID1 also receives the onConnectionStateChanged(CONNECTING, CONNECTING) callback. When successfully joining the channel, UID 1 receives the onConnectionStateChanged(CONNECTED, JOIN_SUCCESS) and onJoinChannelSuccess callbacks.
• T2: 100 ms after UID1 joins the channel, UID2 receives the onUserJoined callback.
• T3: The uplink network condition of UID1 deteriorates. The SDK automatically tries rejoining the channel.
• T4: If UID1 fails to receive any data from the server in four seconds, UID1 receives onConnectionStateChanged(RECONNCTING, INTERRUPTED); meanwhile the SDK continues to try rejoining the channel.
• T5: If UID1 fails to receive any data from the server in ten seconds, UID1 receives onConnectionLost; meanwhile the SDK continues to try rejoining the channel.
• T6: If UID2 fails to receive any data from UID1 in 20 seconds, the SDK decides that UID1 is offline. UID2 receives onUserOffline.
• T7: If UID1 fails to rejoin the channel in 20 minutes, the SDK stops trying to rejoin the channel. UID1 receives onConnectionStateChanged(FAILED, JOIN_FAILED).

For more detailed information, about the connection state and reasons, see IRtcEngineEventHandler.onConnectionStateChanged.

Video SDK provides the following audio profile options:

Video SDK provides the following audio scenarios to choose from:

Audio Scenario	Purpose
Default	Basic communication.
Chatroom Entertainment	Entertainment scenario where users need to frequently switch the user role.
Education	Education scenario where users want smoothness and stability.
Game Streaming	High-quality audio chatroom scenario where hosts mainly play music.
Showroom	Showroom scenario where a single host wants high-quality audio.
Chatroom Gaming	Gaming scenario for group chat that only contains human voice.
IoT	Internet of Things scenario for devices that require low power consumption.
Meeting	Meeting scenario that mainly contains human voice.

Application	Profile	Scenario	Features
One-to-one classroom	Default	Default	Prioritizes the call quality with smooth transmission and high-fidelity audio.
Battle Royale Game	Speech Standard	Chatroom Gaming	Noise reduction. Transmits voice only. Reduces the transmission rate. Suitable for multiplayer games.
Murder Mystery Game	Music Standard	Chatroom Entertainment	High-fidelity audio encoding and decoding. No volume or audio quality change when you mute/unmute the microphone.
KTV	Music High-quality	Game Streaming	High-fidelity audio and effects. Adapts to the high-fidelity audio application.
Podcast	Music High-quality Stereo	ShowRoom	High-fidelity audio and stereo panning. Support for professional audio hardware.
Music education	Music Standard Stereo	Game Streaming	Prioritizes audio quality. Suitable for transmitting live external audio effects.
Collaborative teaching	Music Standard Stereo	Chatroom Entertainment	High-fidelity audio and effects. No volume or audio quality change when you mute/unmute the microphone.

The way video is displayed on the playing device depends on orientationMode used on the encoding device, orientation of the capturing device, orientation of the playing device, and whether screen rotation is enabled on the playing device. The following images show how the video is finally oriented based on these factors.

• Screen rotation: Disabled

• Capturing device orientation: Landscape

• Screen rotation: Disabled

• Capturing device orientation: Portrait

• Screen rotation: Enabled

• Capturing device orientation: Landscape

• Screen rotation: Enabled

• Capturing device orientation: Portrait

• Capturing device orientation: Landscape

• Capturing device orientation: Portrait

• Capturing device orientation: Portrait

• Capturing device orientation: Landscape

• enableDualStreamMode
• setRemoteVideoStreamType
• setAudioProfile
• setVideoEncoderConfiguration
• LastmileProbeConfig
• startLastmileProbeTest
• onLocalVideoStats
• onRemoteVideoStats
• onRtcStats
• onNetworkQuality
• startEchoTest
• stopEchoTest
• LogConfig
• setLocalAccessPoint